Trijicon Mro Scope Review And Things You Need to Know About It.

The Reflector sights, which are also known as reflex views, have been in use for over a century. The world’s first reflex sight was made into use during World War I, which was invented by an Irishman. The idea of reflex sight or scope was conceived when iron sights were found quite hard to use during specific scenarios that need telescopic sights. During the 1900s, a functional reflex sight was finally invented. 

In the year 1918, reflex sights were a preferred choice for the targeting systems of fighter planes from Germany because it was so effective. There were a lot of Improvements in its design after World War II.

Trijicon Mro Scope Review And Things You Need to Know About It.
Trijicon Mro Scope Review

This was made by the companies that were Swain, Nelson Co, Giese, etc. However, it was during 1972 when a red dot was utilized in scopes that were in the market. Weaver “Qwik point” was the name it was called. 

Aimpoint was one of the Swedish companies which created their own design of a reflex sight for the civilian-use during 1973. They also claimed to use LED light instead of incandescent light bulbs, which caused the batteries to drain in a short amount of time. They started calling their product as Aimpoint electronic, and this was one of the primary outcomes of its type, which was there for decades in the US market. 

Trijicon Mro Scope Review And Things You Need to Know About It.
Trijicon Mro Scope Review

Also Check This out: Archangel Stock M1A for Safeguarding Purposes

The Uses Of Red Dots

While using iron sights for aiming, it was not very uncommon for people using their dominant eye while closing the other one. While there is a long going debate that trained professionals are capable of using it with both their eyes open. However, this takes a lot of practice to learn, and it’s quite time-consuming. 

Trijicon Mro Scope Review And Things You Need to Know About It.
Trijicon Mro Scope Review

MRO red dot sights have a unique design that facilitates target acquisition while allowing faster transition between two targets and aiming at a quicker rate besides a full field of view. During various defense scenarios in military situations, the objectives can be aimed at a faster rate with a single point rather than the rear and front iron sights.

Its use is the most essential during quite stressful combat scenarios where aiming and shooting is the only natural instinct. This is the reason why the police and military departments prefer this (sight). During various hunting situations where there is a need for the contrast between the environment and the target, these red dots allow a high level of accuracy over an extended range of several hundreds of meters.

Trijicon Mro Scope Review And Things You Need to Know About It.
Trijicon Mro Scope Review

More On Trijicon MRO

Before going to Trijicon MRO features, the question is, What is Trijicon MRO? This is an optical scope with a large optical lens of 25 mm. This is a relatively new product in the market right now. Its track record is good with is ACOG(Advanced combat optical gunsight) that is the standard optics for the US marine corps.

Trijicon Mro Scope Review And Things You Need to Know About It.

These have a good reputation for their rugged build, durability, and reliability. This scope was released during late 2015. 2.6 inches is the length of the housing, which is the Trijicon MRO mount. It has been built from military-grade 7075-T6 aluminum. Its tensile and yield strength ranges from 74000-78000 psi and 63000-69000 psi, respectively. It is very durable, and it weighs about 4.1 oZ with a sealed O-ring.

It is also very aesthetically pleasing and has a matte black anodized finish while being corrosion resistant. 

Brightness Configuration:

The brightness settings of the Trijicon MRO mount have six modes, including two-night vision brightness modes, which are on the rotational dial located at the top of the scope. It is one of the Trijicon MRO features, which makes it quite ambidextrous. This also allows for the brightness adjustments without leaving grip and trigger hold.

While using it during daylight conditions, the settings 4 and 5 is ideal. When the 5 environment is not entirely satisfactory for the situation, then there is also six sets, but it’s often too overpowered. There are also two other additional settings for night vision purposes. There is less information about these two settings except that these two are essential for night time aiming of the MRO optic.

Battery life:

The battery holder has its convenient position on top of the Trijicon MRO illumination dial. The cover can be unscrewed quite easily by just using a coin and a small screwdriver. There is also a warning sign which says to install the battery correctly. If this is not followed, then it will damage the little metal teeth which are there to hold the battery securely in place.

CR2032 lithium-ion batteries are used for this scope. The Trijicon MRO battery life has a backup of 5 years, even if it is used continuously. Although if you set its brightness level to maximum, then it will drain the battery in just 25 days. However, for this to happen, its brightness should stay at settings 3. While purchasing this product, the batteries are provided free of cost. 

Aim Adjustment:

The turrets of windage and elevation adjustments can be flushed and adjusted by using a coin or a screwdriver, or just with the rim of the ammo casting. While these windage turrets are flushed, it becomes quite difficult for the user to move or brush them.

Covering these with caps is not necessary, so you don’t have to worry about losing them. All these MRO sight features make it quite superior ergonomically in comparison to other competitors in the market. 

Lens:

The objective lens size of this product makes it stand out from other available optical scopes. Most of the red dot sights which are in the market have an objective lens of just 20 mm. However, the Trijicon MRO optic lens is available in 25mm which gives it an added 20% improvement of its sight picture quality.

This gives it a better and broader viewing area, thus eliminating and tunneling effect. This significantly reduces the chances of eye fatigue. The lens of this scope grants eye relief for a longer time and is easy for proper eye vision. 

Fog and waterproofing:

The lenses are quite angled and slightly recessed for the reduction of glare and light reflection. There are multilayered coatings with a slight blue tint. However, they provide a crystal clear vision. These are also very durable. It is also sealed tightly, which makes them waterproof up to 100 feet in depth.

There is a layer of dry nitrogen that has been integrated into the lenses. It makes them capable of working in a temperature range of -60 °F to 160 °F, thus making them fog proof. 

Trijicon Mro Scope Review And Things You Need to Know About It.

Accuracy:

The turning capacity of each adjustment turret is to a maximum of 70 MOA, during its ½ MOA with each consecutive turn. The Trijicon MRO scope has an accuracy range of 300 yards with 2.0 MOA. It is claimed to be parallax free which makes its red dot stay from every angle. Once it is properly sighted, a 1 to 2-inch group across 200 yards can easily be made. There are also lots of options for mounting it on your preferred rifle.

Magnification:

The advertisements for this product clearly states that there is no magnification feature which is available for its lens. Whether there is really an actual magnification or not is subject to online debates. 

The-patrol variant:

There is also a new model with an improved build and more features. It was introduced to the market this year and has been on sale for several months now. It is a bit more costly than the base variant, but its additional features justify the price. In terms of looks, it is quite similar to its original model. However, there are some different features. 

Cleaning The Lens:

While you are using the lens, it is essential to clean it frequently, as for aiming an object, it is really vital to view the subject clearly. It is crucial to follow a proper method for cleaning the dust from the lense. It is widespread that using the wrong process of cleaning can damage your precious lens.

You should use compressed air for cleaning the dust and debris. Then, apply the lens cleaner or just clear water to remove any remaining dust particles altogether. The use of strong solvents is not recommended as it might erode the coating.

Features Of MRO Patrol:

Trijicon Mro Scope Review

Without the mount, this model weighs about 5.1 oz. It is also 4.1 inches longer than the original one, and because of this, the ‘patrol’ variant is a little bit heavier. Two new mro sight attachments can be installed on to this model because it has extra metal rings on the ends of each of its housings. 

  • There is a durable lens flip-up cap for protecting and covering the lens. 
  • It also has an ARD(anti-reflective device), which is capable of reducing the reflection and glare during the day time. During the night, this feature ensures that the lens reflection does not disclose your position if some kind of light falls on it. 

Another advantage of it is that this variant comes with its batteries pre-installed. While in the original one, the user had to install batteries manually. 

MRO patrol also has a quick release(QR) mount system, which is not included in the original MRO. The QR system lightens the tension between your rifle’s Picatinny tail and the mount. Because of this option, you can dismount or remount the red dot sights at a faster rate. 

Witness mounts:

Trijicon Mro Scope Review

Mounts come in two classes, which are Absolute co-witness and Lower ⅓ co-witness ones. 

Absolute co-witness:

This mount allows the optic set up in such a manner that the reticle and the Aimpoint come to the middle of the back and frontal iron sights. For short height individuals, this setup is an ideal one. The only mro problems with this setup are that the view looks a bit cluttered. This setup might not work for taller people. 

Lower ⅓ co-witness:

This mount raises the optic to a quarter of an inch from the iron sights. This setup is suitable for bigger and taller people. The rifles which have a static front and rear iron sights are ideal for this mount. 

The difference between

Aimpoint pro and Trijicon MRO

Even if these two products are quite similar in their features, but there are some apparent differences between the two. Here we will discuss Aimpoint Pro vs. Trijicon MRO key differences. 

  • MRO has a slightly broader point of view than Aimpoint pro besides its red dot of it is somewhat sharper. 
  • Aimpoint Pro has its brightness control and battery space located on the left side. This makes it difficult for right-handed individuals to adjust the Aimpoint’s brightness, whereas the MRO has its brightness rotary dial placed on the top side, which makes it easier for one-handed control. 
  • MRO has a much longer battery backup in comparison to Aimpoint pro. You can also easily find MRO’s spare battery in the market in terms of its availability. 

MRO pros and cons:

Besides so many features of this product, there are some Trijicon MRO problems. We will now look at some of its pros and cons, which are:

Pros:

  • The red dot is sharp.
  • It is compact and light.
  • Has a decent battery life.
  • Easy one-handed brightness control.

Cons:

  • It has a high rate of failure.
  • The old models have a slight fishbowl effect.

To conclude..

Conclusion
Although there are quite a lot of red dots that are available at a cheaper rate but sometimes it is wise to choose an allrounder. MRO may be expensive, but it fulfills a single combat rifle setup for any military combat or hunting situations.

We will be happy to hear your thoughts

Leave a reply